unit ddigi;
{$S-,V-,R-}

interface
uses dos;

type
 Idarray = array[1..8] of char;

var
 AsyncStat:word;
 dport_num: integer;
 nameptr : ^idarray;
 OutReady:boolean;

function  digi_Init_driver : boolean;
function  digi_deinit_driver: boolean;
function  digi_buffer_check: boolean;
procedure digi_send(c: char);
function  digi_receive(var c: char): boolean;
function  digi_carrier_present : boolean;
procedure digi_set_modem;
function  digi_set_baud(n:longint;WordSize:Byte; Parity:Char; StopBits:Byte): boolean;
procedure digi_flush_io;
procedure digi_flush_input;
procedure digi_flush_output;
procedure digi_Get_Info(var drivername:string);
procedure EnableTimeOutError;
procedure Digi_Break(StatusCode : Word);

implementation
const
  dtrmask = 1;
  rtsmask = 2;
type
  BytePtr = ^Byte;
var
  EBIOSok,DTRok,RTSok    : boolean;
  CharReadyP : BytePtr;

function digi_Init_driver : boolean;
var
 regs: registers;
begin;
 with regs do                         { Get Channel Parameters }
   begin
     ah:=$0C;
     dx:=dport_num;
   end;
 intr($14,regs);
 if regs.ah=$FF then
   digi_init_driver :=false
 else
   digi_init_driver :=true;
                                  { Checks for extended Bios }
 asm
   mov ah,$F4
   mov al,$00
   mov dx,dport_num
   int $14
 end;
 If regs.ax=$000 then
   EbiosOk:=true
 else
   EbiosOk:=false;

 with regs do                         { checks modem dtr/rts status }
   begin
     ah:=$05;
     al:=$00;
     dx:=dport_num;
   end;
 intr($14,regs);
 if (regs.bl and DTRmask)<>$00 then
   DTRok:=true
 else
   DTRok:=false;
 if (regs.bl and RTSmask)<>$00 then
   RTSok:=true
 else
   RTSok:=false;

 OutReady:=false;
end;

function  digi_deinit_driver;  { A do nada routine, no deinit calls exist. }
begin
 digi_deinit_driver:=true;
end;

function digi_buffer_check: boolean;
var
 regs: registers;
begin;
 with regs do
   begin
     ah:=$03;
     dx:=dport_num;
   end;
 intr($14,regs);
 if (regs.ah and $01)<>$00 then   { data ready bit               }
   digi_buffer_check:=true        { checks if byte ready to send }
 else
   digi_buffer_check:=false;
end;

procedure digi_send(c: char);
var
 regs: registers;
begin;
 with regs do
  begin
    ah:=$01;
    al:=byte(c);
    dx:=dport_num;
  end;
 intr($14,regs);
                               { bit 5 set on = buffer space avail }
 if (regs.ah and $20)<>$00 then
   OutReady:=true
 else
   OutReady:=false;
end;

function digi_receive(var c: char): boolean;
var
 regs: registers;
begin;
 c:=#0;
 digi_receive:=false;
 if digi_buffer_check then
  begin
    with regs do
    begin
      ah:=$02;
      dx:=dport_num;
    end;
    intr($14,regs);
    if (regs.ah and $8E)=$00 then
      begin
        c:=chr(regs.al);
        digi_receive:=true;
      end;
  end;
end;

function digi_carrier_present: boolean;
var
 regs: registers;
begin;
 with regs do
   begin
     ah:=$03;
     dx:=dport_num;
   end;
 intr($14,regs);
 if (regs.al and $80)<>$00 then      { carrier present bit }
   digi_carrier_present:=true
 else
   digi_carrier_present:=false;
 if (regs.ah and $20)<>$00 then      { bit 5 set on = buffer space avail }
   OutReady:=true                    { thus can check if out buffer ready}
 else
   OutReady:=false;
end;

function ExtBaud(n:longint) : byte;
var
 b:byte;
 w:word;
begin
 b:=$00;
 w:=n;

 If n > 76800 then   { 115200 }
   b:=$0C
 else
 If n > 57600 then   {  76800 }
   b:=$0B
 else
   case w of
     300  : b:=$02;
     600  : b:=$03;
     1200 : b:=$04;
     1800 : b:=$11;
     2400 : b:=$05;
     4800 : b:=$06;
     4801..9600 :  b:=$07;
     9601..19200:  b:=$08;
     19201..38400: b:=$09;
     38401..57600: b:=$0A;
   end;
  ExtBaud:=b;
end;

procedure digi_set_modem;
var
  regs: registers;
begin
  with regs do
   begin
     dx:=dport_num;
     ah:=$05;
     al:=$01;
     If dtrok then bl:=bl or dtrmask;
     If rtsok then bl:=bl or rtsmask;
   end;
  intr($14,regs);
end;

{ This is included for completeness only }
{ Most sysops don't want a door to reinitiallize their board }
{ so this is by passed.                                      }
function digi_set_baud;      { new form digiboard init }
var
  regs: registers;
begin;

  with regs do
   begin
     ah:=$04;
     al:=$00;
     dx:=dport_num;
     case parity of
      'N' : bh:=$00;
      'O' : bh:=$01;
      'E' : bh:=$02;
     end;                  {0 = none/ 1 = odd / 2 = even }
     case stopbits of
       1 : bl:=$00;
       2 : bl:=$01;
     end;
     case wordsize of
       5 : ch:=$00;
       6 : ch:=$01;
       7 : ch:=$02;
       8 : ch:=$03;
     end;
     cl:=ExtBaud(n);      { set baud rate }
  end;
  intr($14,regs);
  if regs.ah=$FF then
    digi_set_baud:=false
  else
   begin
    digi_set_baud:=true;
    digi_set_modem;
   end;
end;

procedure digi_flush_io;
var
 regs: registers;
begin;
 regs.ah:=$09;
 regs.dx:=dport_num;
 intr($14,regs);
end;

procedure digi_flush_input;
var
 regs: registers;
begin;
 regs.ah:=$10;
 regs.dx:=dport_num;
 intr($14,regs);
end;

procedure digi_flush_output;
var
 regs: registers;
begin;
 regs.ah:=$11;
 regs.dx:=dport_num;
 intr($14,regs);
end;

procedure digi_Get_Info(var drivername:string);
const
 dname : array[1..5] of
  string [6] = ('COM/Xi','MC/Xi', 'PC/Xe', 'PC/Xi', 'PC/Xm' );
var
 i:byte;
 regs: registers;
 d,s,o:string;
 versno:word;
begin;
 versno:=0;
 d:='';s:='';o:=' ';
 with regs do
  begin
    ah:=$06;
    al:=$ff;
    dx:=dport_num;
  end;
 intr($14,regs);
 nameptr := ptr(regs.es,regs.bx);
 i := 1;
 while (i<8) and (nameptr^[i] <> #0)  do
   inc(i);
 move(nameptr^, d[1], i);
 d[0] := char(i);

 with regs do
  begin
    ah:=$06;
    al:=$01;
    dx:=dport_num;
  end;
 intr($14,regs);
 if regs.ah<>$ff then
  begin
    versno:=regs.bx;
    str(versno,o);
    s:=' Version['+o+'] : ';
    str(regs.ax,o);
  end;
 d:=d+s;

 s:='';

 with regs do
  begin
    ah:=$06;
    al:=$02;
    bx:=$000;
    dx:=dport_num;
  end;
 intr($14,regs);
 if regs.ah<>$ff then
   If regs.al in [$01..$05] then s:=dname[regs.al]
   else str(regs.al,s);
 drivername:=d+s+o;

end;

procedure EnableTimeOutError;
var
 regs: registers;
begin;
 with regs do
  begin
    ah:=$20;
    al:=$01;
    dx:=dport_num;
  end;
 intr($14,regs);
end;

procedure Digi_Break(StatusCode : Word);  { send break }
var
 regs: registers;
begin;
 with regs do
  begin
    ah:=$07;
    al:=$00;       { defaults 250 millisecs }
    dx:=dport_num;
  end;
 intr($14,regs);
 AsyncStat := StatusCode;
end;


end.